HowTo: Install rhev-agents on Scientific Linux 6x

Now that you have your first VM (in our case, Scientific Linux) installed on your brand new oVirt system. You probably want to get the VM enhancements setup so we can see cool stuff like server IP in the information window of oVirt. 

1. Get logged into your server. 

2. Install your deps:  

yum install dbus-python python-ethtool usermode wget openssh-clients -y
3. download rhev-agents RPM from the CERN repo. 
 wget http://linuxsoft.cern.ch/cern/ev/slc6X/x86_64/RPMS/rhev-agent-2.3.16-3.el6.x86_64.rpm

4. Install the RPM.

rpm -Uvh rhev-agent-2.3.16-3.el6.x86_64.rpm

5. Your all finished, At this point you can reboot if you would like but it should not be required!